2- layer Bottom Overlay and fusible interfacing; right side of fabric with smooth side of interfacing.(.or glue side up.) Stitch across the top at 1/4 inch. Clip curves and turn to right side.
3- finger press, then iron, across the very top. Then iron the whold piece. Do this with both overlays.
6- With main pieces, right sides together, sew side and bottom seams at 1/4"
9- Press raw edges under 1/4". Edge stitch pocket closed.
10- Attach pocket to right side of one lining piece.
11-With right sides of lining pieces together, sew side seams, bottom seam, then corner seams.
12- Turn right side out, and press side seams of lining, and of main bag body.
13- Now it's time to make the handles. Take the handle pieces, fold in half and press. Open, then fold sides in to center fold line, and press.
14-fold in half and press again.
15- Top stitch handles at 1/8th and 1/4 inches. Press flat.
16-pin handles in the center of the handle spaces on main fabric. Set main body aside for a minute.
17- Attach magnetic snap to lining.
18-Put main purse into lining--right sides together. Match side seams and pin in place.
21-Fold the spece you left open undre 1/4". Press and pin.
22-top stitch around the whole purse opening at about 1/4".
23-Press entire purse, especially the top edge.
24-Embellish however you would like!! I used this flower!